
Warranty Pass
Service plan (continued)
parts | work |
|
|
hubs | check bearing play and brake discs mount |
|
|
pedal | check bearing play, check binding mechanism |
|
|
frame | check clamping of the front boom |
| clean and conserve |
| check for damage, damage to paintwork |
quick release | check correct closing |
|
|
derailleur | check for movement and function |
| clean and lubricate |
|
|
screws and nuts | check and tighten |
|
|
mudguards | check for damage and correct position |
|
|
valves | check for correct position and air tightness |
|
|
stem | check clamping |
| check clamping screws |
|
|
cables | dismount, lubricate, replace if necessary |
|
|
This service plan is intended to give you a rough overview over the required maintenance and service works. In no case it can replace the detailed instructions in this manual!
You can perform service works marked with a "●" if you have the required skills and tools as for example a torque wrench.
If you discover any defects while checking your bicycle they have to be repaired immediately. If you are in doubt please consult your local bike shop.
Works marked with a "▲" should only be carried out by a trained bicycle mechanic.
At the annual service the bicycle mechanic has to carry out all works listed as well as all services and maintenance works necessary according to the momentary technical standard and professional knowledge.
Please follow at any rate the manuals of the parts manufacturers.
60HPVelotechnik