Haan SV-60 user manual Troubleshooting cont, 1The unit was left in one spot too long

Troubleshooting (cont.)

PROBLEM: The sound of the cleaner during use is strange.

Possible Cause:

1)This problem may occur if the suction function is not working properly.

Possible Solution:

1)Check to see if the Dust Collection Bin and filter is in need of cleaning.

2)Verify that all parts are firmly in place (such as the clear cover on the Dust Collection Bin)

3)Check to see if any foreign object is lodged in the vacuum vent and if so dislodge it.

PROBLEM: During vacuum use, air is emitted via the opening of the Dust Collection Bin.

Possible Cause:

1)This air is from the suction opening when the motor is operating. It is not harmful in any way to the product or user.

PROBLEM: Steam Vacuum left a white spot on the floor.

Possible Cause:

1)The unit was left in one spot too long.

2)The unit was not placed on the Resting Mat while not in use.

3)The water in the tank is too hard and is leaving behind mineral residue.

Possible Solution:

1)NEVER leave the Steam Vacuum in one spot on any surface for any period of time.

2)When resting or in-between uses, always place the Steam Vacuum on the Resting Mat and make sure tht the unit is turned OFF.

3)HAAN® strongly recommends the use of distilled water in the SV-60 when the water in the area is hard.

w w w. H A A N USA . com 877 - HAAN DIRECT / 877 - 422 - 6347 pg 21