Maintenance, Flush the Spray Gun | Haier 309292L instruction

Maintenance

Maintenance

Refer to the gun operation manual (supplied) for Daily Care and Cleaning procedures.

INSTRUCTIONS

Flush the Spray Gun

Flush the gun before changing colors, at the end of the day, before storing, and before repairing the gun.

WARNING

Fire, Explosion, and Electric Shock Hazard

To reduce the risk of fire, explosion, or elec- tric shock, turn the ES ON/OFF valve OFF before flushing the gun.

CAUTION

Flush the gun with a non-conductive, compatible solvent. Conductive solvents can cause the gun to malfunction.

Do not use methylene chloride as a flushing or cleaning solvent with this gun as it will damage nylon components.

1. Turn the ES ON/OFF valve OFF.

I ES O

ti1273a

WARNING

Pressurized Equipment Hazard

To reduce the risk of an injury, follow the Pressure Relief Procedure on page 24 whenever you are instructed to relieve the pressure.

2. Relieve the pressure.

ti1276a

3.Change the fluid source to solvent, or disconnect the fluid line and connect a solvent supply line to the gun.

4.Point the gun into a grounded metal pail. Flush until clean solvent flows from the gun.

ti1276a

5. Relieve the pressure.

ti1276a

6. Shut off or disconnect the solvent line.

16

309292L

Image 16

Haier 309292L important safety instructions Maintenance, Flush the Spray Gun

Contents

PRO Xs3 and PRO Xs4 Air Spray Guns Table of Contents List of Models Fire, Explosion, and Electric Shock Hazard SymbolsToxic Fluid Hazard Equipment Misuse Hazard Pressurized Equipment Hazard How the Electrostatic Air Spray Gun Works IntroductionGun Overview Installation Install the SystemVentilate the Spray Booth Flammable or Toxic Vapor Hazard Typical Installation Key Connect the Air Line Connect the Exhaust TubeElectric Shock Hazard Supply Hose Connect the Fluid Line Filter the FluidSelect a Fluid Nozzle and Air Cap Orifice Size HC Conversion Kit 244919 Conversion Kit Grounding Check Electrical Grounding Check Gun Grounding Check Fluid Resistivity Check Fluid Viscosity Operation Low Voltage Adjustment Smart Guns OnlyKV Guns Maintenance Flush the Spray Gun Hang the gun from its hook, with the nozzle pointing down Electrical Tests Test Gun Resistance Test Power Supply Resistance Test Power Supply Resistance Test Electrode Resistance Test Electrode Resistance Troubleshooting Spray Pattern Troubleshooting Gun Operation Troubleshooting See Test Gun Resistance on Electrical TroubleshootingSee Check Fluid Resistivity on Pressure Relief Procedure Repair Prepare the Gun for Service Air Cap/Nozzle Replacement Electrode Replacement Electrode Replacement Fluid Packing Removal Fluid Packing Removal Packing Rod Repair Packing Rod Barrel Installation Barrel Removal Power Supply Removal and Replacement Power Supply Turbine Alternator Removal and Replacement Fluid Tube Removal Replacement PRO Xs4 Guns Only Fan Air Adjustment Valve Repair Fan Air Adjustment Valve Fluid Adjustment Valve Repair Air Valve Repair Atomizing Air Restrictor Valve Removal and Replacement ES ON/OFF Valve Repair Parts Ref. No Packing Rod Ref. No ES ON/OFF Valve Ref. No Alternator Ref. No Fan Adjustment ValveFluid Tube Model Description Qty Description Qty 51 Ref Ref. No ES ON/OFF Valve Ref. No Packing Rod Part No. Description Qty Part No. Description Qty Air Line Accessories AccessoriesFluid Line Accessories Gun Accessories Miscellaneous Accessories Technical Data Category Data Technical Data 309292L Graco Information Graco Standard WarrantyToll Free