Introduction
Introduction
How the Electrostatic Air Spray Gun Works
The air hose supplies air to the spray gun. Part of the air operates the turbine and the rest of the air atomizes the fluid being sprayed. The turbine generates power, which is converted by the power cartridge to supply high volt- age current to the gun’s electrode.
The pump supplies fluid to the hose and gun, where the fluid is electrostatically charged as it passes the elec- trode. The charged fluid is attracted to the grounded workpiece, wrapping around and evenly coating all sur- faces.
•Fan AIR adjustment valve. Adjusts fan size and shape.
•Atomizing air RESTRICTOR valve. Restricts atomizing air flow. Replace with plug (included) if desired.
•ES ON/OFF valve. Turns electrostatics ON (I) or OFF (0).
•ES INDICATOR (standard gun only). Green when ES is ON (I).
•Voltage/current DISPLAY (smart models only). Shows voltage (V) and current (A). Green=spray, yellow/red=see Troubleshooting, page 23.
Gun Overview
The electrostatic gun includes the following controls (see FIG. 1.).
•FLUID adjustment valve. Adjusts fluid rod travel. Use only in low flow conditions, to reduce wear.
ES INDICATOR
ES ON/OFF
•ES HI/LO switch (smart models only). Sets volt- age to HI or LO (factory settings).
•LO VOLTAGE adjustment (smart models only). Remove plug to adjust to four settings.
DISPLAY
LO VOLTAGE
ES HI/LO | 0 KV 100% |
| μα |
| HI |
LO | ES |
I ES O
RESTRICTOR
ti1266a
ES ON/OFF
AIR
RESTRICTOR
FLUID
I ES O
AIR
FLUID
ti1253a
Standard Model | Smart Model |
Fig. 1. Gun Overview
6 | 309292L |
