Haier 309292L Connect the Air Line, Connect the Exhaust Tube, Electric Shock Hazard, Supply Hose

Connect the Air Line

WARNING

Electric Shock Hazard

To reduce the risk of electric shock or other serious injury, the air supply hose must be electrically connected to a true earth ground. Use only Graco Grounded Air

Supply Hose.

1.Connect the Graco Grounded Air Supply Hose (R) between the air supply line and the gun's air inlet

(V). The gun air inlet fitting has a left-hand thread. Connect the air supply hose ground wire (Q) to a true earth ground.

2.Install an air line filter/water separator (O) on the gun air line to ensure a dry, clean air supply to the gun. Dirt and moisture can ruin the appearance of your finished workpiece and can cause the gun to malfunction.

3.Install a bleed-type air regulator (G) on the pump and gun air supply lines to control air pressure to the pump and gun.

Installation

4.Install a bleed-type air valve (E) on the pump air line to shut off air to the pump. Install an additional bleed-type air valve (C) on the main air line (A) to isolate the accessories for servicing.

WARNING

Pressurized Equipment Hazard

The bleed-type air valve (E) is required in your system to relieve air trapped between the valve and the pump after the air regula- tor is shut off. Trapped air can cause the pump to cycle unexpectedly, which can result in serious injury, including splashing fluid in the eyes or on the skin.

5.Install an air shutoff valve ( P) on each gun air sup- ply line to shut off air to the gun(s).

Connect the Exhaust Tube

Press the exhaust tube (38) onto the barbed adapter on the bottom of the gun handle. Secure the tube with the clamp (39).

309292L 9