Haier AB142ACEAA Clean air filter, Clean inlet grill, Maintenance, Open inlet grill, controller

Maintenance

(For series 242, 282 )

[Clean air filter]		(B) Wash with water.
		With too much dust, use soft brush and neutral
NOTE	When having to clean, don't dismantle
		detergent.
	air-filter,otherwise may cause faults.
		Swing off the water, and then place in cool place.
	In the environment where there is too
	much dust, air filter should be cleaned
	for more times.
	(about half a year one time)

1. Open inlet grill

Press the elliptical "PUSH" knob, the inlet grill will automatically drop. (the inlet grill is catched with two pothooks)

5. Install air filter
(1)	Put filter into protruding parts at the top of
	the inlet grill.
(2)	Connect the two pothooks with inlet grill

PUSH

Press the elliptical knob the inlet grill will automatically drop

See 2

Open two	Pothook
pothooks

2.Open two othooks

3.Dismantle air filter

Connet the two pothooks with inlet grill

6.Close inlet grill See 1.

7.Press the filter signal return key on the

controller. '' ''

Air filter

4. Clean

Drag the knob of the grill back lift the filter and take down.

CAUTION!

[Clean inlet grill]

1. Open inlet grill

Press the elliptical "PUSH" knob, the inlet grill will automatically drop. (the inlet grill is catched with two pothooks)

PUSH

Press the elliptical knob the inlet grill will automatically drop

(A) Remove dust with vacuum filter.

Open two	Pothook
pothooks

8