Maintenance
4.Install air filter
(1)Put the air filter into those extruding parts at the top of the air inlet grille. (2)Draw the handles at the back of the air inlet grille inwards to fix the air filter.
5. Close air inlet grille
Referring to procedure 1.
Clean the air inlet grille
1. Open air inlet grille
Pull the two handles at the same time, slowly draw them out. (when closing it, the procedure is reversed.)
Open 
2. Remove air filter
Referring to “Clean the air filter”.
3. Remove the air inlet grille
Open the air inlet grille for 45 , the lift it up.
4. Clean
Notice
Do not use the hot water over 50 
C to clean to avoid discoloration or deformation.
Use soft brush, water and neutral detergent to clean, then throw the water off.
Instruction
[ When there is too much dust ]
Use ventilation fan or directly spray the detergent special for kitchen ware on the air inlet grille, 10 minutes later use water to clean.
5. Install air inlet grille
Referring to procedure 3.
6. Install the air filter
Referring to “Clean the air filter”
7.Close air inlet grille Referring to procedure 1.
11
