Installation Procedure
Installation Precaution
Please ask the dealer or specialist to install, never try by the users themselves. After the installation please be sure of the following conditions.
WARNING
Please call dealer to install the
CAUTION
near |
| |
Installed |
| |
It easily cause electrical shock without circuit breaker. |
| |
Connect earthing wire. |
| |
Earthing wire should not be connected to the gas pipe, water pipe, lightning rod or phone line, incorrect earthing | Earthing | |
may cause shock. |
| |
Use discharge pipe correctly to ensure efficient discharge. |
| |
Incorrect pipe use may cause water leaking. |
| |
Wiring |
| |
| ||
Location |
| |
| ||
| ||
(1) | Places with machine oils or other oil vapours. |
|
(2) | Seaside with high salt content in the air. |
|
(3) | Near hot spring with high content of sulfide gases. |
|
(4) Area with frequent fluctuation of voltage e.g. factory, etc. |
| |
(5) | In vehicles or ships. |
|
(6) | Kitchen with heavy oil vapour or humidity. |
|
(7) | Near the machine emitting |
|
(8) | Places with acid, alkali vapour. |
|
Choose the following locations:
(1)Capable of supporting air conditioner weight. Don't increase operating noise and vibration.
(2)Hot vapour from outdoor unit outlet and operating noise don't disturb neighbour.
(3)No obstacles around the outdoor unit outlet.
TV, radio, acoustic appliances etc. are at least 1 m far away from the indoor unit, outdoor unit, power supply wire, connecting wire, pipes, otherwise images may be disturbed or noises be created.
As required, take measures against heavy snow.
For authorized sevice personnel only
WARNING
(1)For the room air conditioner to operate satisfactorily, install it as outlined in this installation manual.
(2)Connect the indoor unit and outdoor unit with the room air conditioner piping and cords available from our standard parts. This installation manual describes for the correct connections so that the installation set available from our standard parts should be used.
(3)Installation work must be performed in accordance with national wiring standards by authorized personnel only.
(4)Never cut the power cord, lengthen or shorten the cord, or change the plug. Do not use an extension cord.
(5)Plug in the power cord plug firmly. If the receptacle is loose, repair it before using the room air conditioner.
(6)Do not turn on the power until all installation work is done.
CAUTION
(1)Be careful not to scratch the room air conditioner when handing it.
(2)After installation, explain correct operation to the customer, according to the operating manual.
(3)Let the customer keep this installation manual because it will be used when the room air conditioner is serviced or moved.
16
