Haier AP602AKEAA, AP482AKEAA installation manual Control panel, Remote-controlunit, Operation

Operation

Control panel

ON/OFF MODE FAN

TEMP

TEMP+ TEMP- HEALTH

Remote-control unit

TEMP

ON

HEALTH OFF FAN

MODE

SLEEPSWING

CLOCKSET

TIMER

HEAT

RESET LIGHT LOCK

Remote	AUTO COOL DRY FAN HEAT
controller

Control panel

AUTO COOL DRY FAN HEAT

Then select AUTO run or select COOL operation or select DRY operation or select HEAT operation*

3Select temp. button Press TEMP button

TEMP+ Every time the button is pressed, temp. setting increases 1C

TEMP- Every time the button is pressed, temp. setting decreases 1C

If the button is kept pressed, setting will increase or decrease quickly.

4Press FAN,For each press, operation mode changes as follows:

Remote controller LOW MID HIGH AUTO

1Press ON/OFF button Unit starts running.

The previous status appears on the display (except. TIMER, SLEEP mode)

2Press MODE button. For each press, operation mode changes as follows:

Control	2 1 2	3	2 1 2 3	4 3 2 1 2 3 4	4 3 2 1 2 3 4
panel	LOW		MID	HIGH	AUTO
					Part 1 to 4
					bright periodically

Unit runs at the speed displayed on LCD. When fan speed is AUTO,it is changed automatically according to the indoor temperature.

5Press ON/OFF button Unit stops running.

In DRY mode, when room temp.becomes 2 oC higher than temp. setting,unit will run intermittently at LOW speed regardless of FAN setting.

COOL operation starts when room temp. is higher than temp. setting.

Ultra-low air flow

Temp.setting+2 C

Temp.setting

On reaching 2C higher than temp. setting,unitwill run in mild DRY mode.

Note:

During Auto run operation, temp. setting will be shown in LCD display, unit will select heating, cooling or fan operation according to the room temp.

6