Haier RRCS25, PRCS25ED warranty Removing and Installing the Convertible Drawer only if necessary

Models: RRCS25TD PRCS25SD PRCS25 PRCS25ED RRCS25

1 96
Download 96 pages 53.47 Kb
Page 7
Image 7
Removing and Installing the Convertible Drawer (only if necessary)

Removing and Installing the Doors

If necessary, remove the middle hinge.

To install the freezer door, follow reverse order.

 

When raising the hinge to separate it from the door, be careful the hinge doesn’t drop to the floor. When

 

re-installing the door water line connector, please seat it all the way in the water pipe in the union, and

Note

add union black clips to secure line in place.

Removing and Installing the Convertible Drawer (only if necessary)

Open the drawer completely.

Using a screwdriver remove the screws on both sides of

 

the glide (as shown). Take off the supports on both sides,

 

then remove the drawer and place in a safe place.

Screw

To install the drawer, follow reverse order.

Warning

To prevent a suffocation hazard for children or pets, do not allow them to play inside the drawer.

6

Page 7
Image 7
Haier PRCS25, RRCS25 Removing and Installing the Convertible Drawer only if necessary, Removing and Installing the Doors