Hamilton Beach Stay or Go Coffeemaker Permanent Filter, Water Filter, To Program Automatic Brew

840131500 ENv00.qxd 9/9/04 2:17 PM Page 6

Optional Features (on selected models)

Permanent Filter

The Permanent Filter takes the place of disposable paper filters. Simply place the Permanent Filter in the filter basket. Rinse the Permanent Filter in hot water before first use. Clean the Permanent Filter under hot running water and let dry. Permanent Filter can also be washed on the top rack of an automatic dishwasher.

Water Filter

1.To replace, pull up on lid of filter holder while holding filter base, turn filter base to allow filter to

drop out.

To Program Automatic Brew

1.Make sure clock is set for correct time of day.

2.Press PROG button and digits will flash.

3.Press H and M buttons until desired brewing time is reached.

4.Press PROG button to confirm set- ting. Digits will stop flashing and return to set time of day.

5.Once brewing time has been set, follow this procedure:

•Follow steps in “How to Make Coffee.”

•Push AUTO-ON-OFFbutton once and “Auto” will be shown in display indicating the brew cycle will begin at the set time.

NOTE: If AUTO-ON-OFF is pushed twice, the light will glow and brewing will begin immediately. Press AUTO- ON-OFF once to turn off and once more to set programming mode.

2.Before first use, soak water filter in cold tap water for 15 minutes. Then rinse under cold running tap water for 15 seconds.

3.Insert filter in base. Snap lid onto base.

4.Place filter and filter holder in reservoir.

5.Replace after 60 brew cycles of cof- fee. Set your replacement month by aligning the arrow with the month you expect will represent 60 brew cycles.

6