Caring for the Blender
Maintenance
Inspect the blender and its various parts and replace as follows:
Daily | Unplug the blender and remove the jar from the base, and then inspect the jar |
| and cutter assembly for wear, nicks, or broken blades. Replace if necessary. |
| See “Replacement Parts”. If the cutter assembly blades are loose, |
| discontinue use immediately. Do not attempt to repair or tighten the cutter assembly. |
Weekly | Unplug the blender, and then inspect the power cord insulation and power plug |
| for cracks. Inspect sealing gasket for cracking and leaking of fluids under unit. |
| Refer to “Requesting Assistance or Service” for repair or replacement. |
Yearly | Replace the jar and cutter assembly at least once a year or sooner if the cutter assembly |
| appears worn or damaged. See “Replacement Parts”. |
|
|
NOTE: Do not operate this blender if it malfunctions or is dropped or damaged in any manner. Return blender to the nearest authorized service facility for examination, repair, or electrical or mechanical adjustment.
Replacement Parts
Refer to “Requesting Assistance or Service” to order parts below.
Description . . . | Part Number . . . |
|
|
32 oz.0.95 L Polycarbonate jar and cutter assembly | |
(includes cover/filler cap) |
|
Quiet Shield™ sound enclosure | QS916 |
|
|
15
