3800/3900
Conventional laser data format is provided at the modular connector in the scanner handle. The interface cable is terminated with a 10 pin modular plug, and a 9 pin Type D (squeeze to release) connector that is compatible with all Hand Held Products terminals.
Laser | Standard |
User’s Guide
10 Pin Modular Plug
onnects to the scanner handle
1Turn on good read or LED beeper
2Trigger signal to decoder
3Laser enable
4Supply ground
5
6Digital bar code data output
7Power connection (Refer to table on page
9Start of scan
Output Only (Laser | Cable Pinouts |
Compatible |
|
Start of scan 1 
Digital bar code data output 2 Turn on good read LED or beeper 3 ◆ N/C 4
Trigger signal to decoder 5
6Laser enable
7Supply ground
8Cord shield
9 5 Volt power connection ◆
Bar Image) |
13 - 3
9 Pin Type D Female | ◆ Pins 4 and 9 are populated depending on power supply voltage option. | ||
connects to your terminal | |||
Some decoders may have +12V on pins 4 or 9. | Connect to +5VDC ONLY! | ||
| |||
