Chapter 9 Page 207
4. Repeat steps 2 and 3 until the login script is complete.
5. Tap OK.
Deleting a service template
There is only one way to delete a service template: use the Delete
command from the Service menu.
To delete a service template:
1. Tap the Service pick list.
2. Tap the service template you want to delete.
3. Tap the Menu icon .
4. Tap Service, and then tap Delete.
5. Tap OK.
Send
Password
Transmits the password entered in the
Password field of the Network Preferences
screen. If you did not enter a password,
this command prompts you to enter one.
The Password command is usually
followed by a Send CR command.
Delay Tells your handheld to wait a specific
number of seconds before executing the
next command in the login script.
Get IP Reads an IP address and uses it as the IP
address for your handheld. This command
is used with SLIP connection s.
Prompt Opens a dialog box and prompts you to
enter text of some kind (for example, a
password or a security co de).
End Identifies the last line in the login script.