9.Store idle equipment. When not in use, tools and equipment should be stored in a dry location to inhibit rust. Always lock up tools and equipment, and keep out of reach of children.
10.Do not use this product if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgement or reflexes are impaired while taking drugs. If there is any doubt, do not attempt to use this product.
11.Industrial applications must follow OSHA requirements.
12.Maintain this product with care. Keep this product clean and dry for better and safer performance.
13.Maintenance: For your safety, service and maintenance should be performed regularly by a qualified technician.
14.Check for damaged parts. Before using this product, carefully check that it will operate properly and perform its intended function. Check for damaged parts and any other conditions that may affect the operation of this product. Replace or repair damaged or worn parts immediately.
15.Use the right tool for the job. Do not attempt to force a small tool or attach- ment to do the work of a larger industrial tool or attachment. There are certain applications for which this tool was designed. It will do the job better and more safely at the rate for which it was intended. Do not modify this tool, and do not use this tool for a purpose for which it was not intended.
16.Reduce the risk of accidental starting. Make sure the Power Switch (30) is in the “OFF” position before plugging the Power Cord (29) into a 110 volt, grounded, electrical outlet.
17.Never stand on the Sander. Serious personal injury can result if the machine is tipped or if a spinning Sanding Belt or Disc is contacted.
18.Prior to starting the Sander, make sure all adjusting keys and wrenches are removed from the machine.
19.Before sanding, turn on the Sander and check for excessively loose Sand- ing Disc (12) or Belt (45). If necessary, turn off the Sander and correct the problem before using.
20.Always keep hands and fingers as far away as possible from the moving parts of the Sander.
SKU 05154 | PAGE 9 |
