To prevent serious injury
from accidental operation:
Turn the Power Switch (46) of the Lathe to its “OFF” position and unplug the machine from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
To prevent serious injury from machine failure:
Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.
1.BEFORE EACH USE, inspect the general condition of the Lathe. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wir- ing, and any other condition that may affect its safe operation.
2.After Use, clean external surfaces of the tool with clean cloth.
3.DAILY, lubricate all external moving parts with ISO 68 or SAE 20W oil.
4.Lubricate the Tailstock oiling point every five uses, or once per week if used frequently.
5.
WARNING! If the Power Cord (45) of this Lathe is damaged, it must be replaced only by a quali- fied service technician.
PLEASE READ THE
FOLLOWING CAREFULLY
The manufacturer and/or distributor has provided the parts list and assembly diagram in this manual as a reference tool only. Neither the manufacturer or distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make any repairs to the product, or that he or she is qualified to replace any parts of the product. In fact, the manufacturer and/or distributor expressly states that all repairs and parts replacements should be undertaken by certified and licensed technicians, and not by the buyer. The buyer assumes all risk and liability arising out of his or her repairs to the original product or replacement parts thereto, or arising out of his or her installation of replacement parts thereto.
SKU 65345 | For technical questions, please call | Page 18 |
