Harman DMS70 manual Rear panel

Description

Rear panel

Figure 2: Controls on the rear panels of the DSR 70 Dual and Quattro receivers

8 AUTO CORRECTION switch: to adjust internal error correction.

9 Sum output/BALANCED (x1): Balanced audio output to 3-pin XLR connector. This output transmits the combined audio signal of all 4 channels and you can connect it directly to an active speaker.

10a CHANNEL OUT (x2): Balanced audio output to 6.35 mm jack. This output transmits the audio signal of the respective channel. Can be connected to a microphone input on a mixer, for example.

10 CHANNEL OUT/BALANCED (x4): Balanced audio output to 3-pin XLR connector. This output transmits the audio signal of the respective channel. Can be connected to a microphone input on a mixer, for example.

11 DC IN jack 12 V, 0.5 A: for connection to supplied external plug adapter.

12 Strain relief for the feeder cable of the supplied AC adapter.

26 DMS 70 Quattro/Dual