Installation and Connection

Connecting the audio outputs of the DSR 70 Quattro receiver

Connecting the DSR 70 Dual receiver to a balanced input

Connecting the receiver to a balanced input

Use an XLR cable to connect the BALANCED output (10) of the required channel on the back of the receiver to the balanced microphone input (XLR socket) on the mixer or amplifier.

Connecting the receiver to a speaker

Use an XLR cable to connect the sum output (9) of all four channels on the back of the receiver to an active speaker.

Connect the 6.35 mm jack (10a) of the required channel on the back of the receiver to the balanced microphone input on the mixer or amplifier.

32

DMS 70 Quattro/Dual

Page 32
Image 32
Harman DMS70 manual Installation and Connection