Harman DMS70 Different AC voltage may wreck the unit, On the receiver, For the country you are

Installation and Connection

3 Installation and Connection

Positioning the receiver

Rack assembly

1)Always position the receiver near to where the action is taking place (e.g. stage).

2)Check that you can see the receiver from where you will be using the transmitter.

Assembling the DSR 70 Dual in a 19" rack

Figure 6: Assembling the DSR 70 Dual in a 19" rack

For assembling one or more DSR 70 Dual receivers, the RMU 40 PRO rack assembly set is available in the current AKG catalogue/folder or at www.akg.com.

NOTE

Assembling the DSR 70 Quattro in a 19" rack

Assemble the DSR 70 Quattro receiver in your 19" rack with the supplied rack brackets, fixing screws and washers - these are screwed into the side of the receiver.

1)Unscrew the fixing screws of each of the two side walls.

2)Secure the rack brackets to the receiver using the fixing screws.

3)Secure the receiver in the rack.

4)Rotate both antennas (7) up to the "normal position" (see diagram on the title page) to achieve optimum transmission and reception performance.

Figure 7: Fitting the DSR70 in a 19" rack

Use of two receivers in one rack

1)Fit both receivers in the rack with one unit of space between them.

2)Rotate both antennas (7) up to the "normal position" (see diagram on the title page).

Connecting the receiver to power	1)	Check that the AC mains voltage stated on the included power supply is identical to the
		AC mains voltage available where you will use your system. Using the power supply with
		a different AC voltage may wreck the unit.
	2)	Plug the feeder cable of the included power supply into the 12 V, 0.5 A, DC IN socket
		(11) on the receiver.
	3)	Connect the AC adapter to a power outlet. Ensure that you are using the correct adapter
		for the country you are in.

DMS 70 Quattro/Dual 31