required for
Front Surround Center
Multichannel analog audio cable (RCA)
Subwoofer
Figure 8 – Multichannel Analog Audio
Harman Kardon receivers also include a proprietary, dedicated audio connection called The Bridge II. If you own a docking iPod (most models, 4G or later), connect The Bridge II (included) to The Bridge II port on the receiver. See Figure 9. Dock your iPod (not included) in The Bridge II, and you may listen to your audio materials through your high-perform- ance audio system. You may view still images or video materials stored on a photo- or video-capable iPod that supports video browsing. You may even use the AVR 354 remote to control the iPod with navigation messages displayed on the front panel and on a video display connected to the AVR. The Bridge II outputs analog audio to the AVR 354, and it is available to the multiroom system.
Figure 9 – The Bridge II
Video Connections
Although some sources only produce an audio signal (e.g., CD player, tape deck), many sources output both audio and video signals (e.g., DVD player, cable television box, HDTV tuner, satellite box, VCR, DVR). In addition to the audio connection, make one type of video connection for each of these sources (only one at a time for any source).
Digital Video
If you have already connected a source device to one of the HDMI inputs as explained in the Digital Audio Connections section, you have automatically made a video connection at the same time, as the HDMI signal includes both digital audio and video components.
If the source device is not capable of transmitting its digital audio signal through the HDMI connection, use one of the coaxial or optical digital audio inputs for the source.
If a multichannel analog audio connection is required for certain lossless formats (e.g.,
CONNECTIONS
Analog Video
There are three types of analog video connections: composite video,
Composite video is the basic connection most commonly available. The jack is usually
Composite video cable
Figure 10 – Composite Video
Figure 11 – S-Video
Component video separates the video signal into three components – one luminance (“Y”) and two sub-sampled color signals (“Pb” and “Pr”) – that are transmitted using three separate cables. The “Y” cable is color- coded green, the “Pb” cable is colored blue and the “Pr” cable is colored red. See Figure 12.
Component video cable
Figure 12 – Component Video
If it’s available on your video display, an HDMI connection is recom- mended as the best quality connection, followed by component video,
NOTES:
•
•Standard and
Antennas
The AVR 354 uses separate terminals for the included FM and AM antennas that provide proper reception for the tuner.
21 | 21 |