![REAR-PANEL CONNECTIONS](/images/new-backgrounds/13908/1390819x1.webp)
REAR-PANEL CONNECTIONS
Main Power Switch: This mechanical switch turns the power supply on or off. It is usually left on, and cannot be turned on or off using the remote control.
Coaxial 1/2 and Optical 1/2/3 Digital Audio Inputs: If a source has a compatible digital audio output, and if you are not using an HDMI connection for audio for the device, connect it to one of these jacks to hear digital audio formats, such as Dolby Digital, DTS and linear PCM. Use only one type of digital audio connection for each source.
Coaxial Digital Audio Outputs: If a source is also an audio recorder, connect the Coaxial Digital Audio Output to the recorder’s matching input for improved recording quality. Only PCM digital audio signals are available for recording. Both coaxial and optical digital audio signals are available at this Digital Audio Output.
SIRIUS Tuner Jack: Plug in a SIRIUS satellite radio tuner module here.
Zone 2 Infrared (IR) Input: Connect a remote IR receiver located in the remote zone of a multizone system to this jack to control the AVR (and any source devices connected to the Remote IR Output) from the remote zone.
Remote Infrared (IR) Input and Output: When the remote IR receiver on the front panel is blocked, connect an optional IR receiver to the Remote IR Input jack. The Remote IR Output may be connected to the Remote IR Input of a compatible product to enable remote control through the AVR.
Remote IR Carrier Output: This output is similar in function to the Remote IR Output, with the difference that this jack outputs the full infrared signal as received by the AVR’s IR sensor or the Remote IR Input, while the Remote IR Output jack outputs a “stripped” signal that has no carrier frequency.
HDMI Inputs and Output: HDMI
When you connect the HDMI Output to your video display, the AVR 3600 will automatically transcode analog video signals to the HDMI format, upscaling to as high as 1080p.
NOTES: When connecting a
•Use an
•Make sure the display is
•Always make a separate audio connection.
Analog 1 – 5 Inputs: Connect the left and right analog audio outputs of a source device to any of these inputs. These inputs may be paired with any video inputs.
NOTES:
•The Analog 2 and 4 inputs are each associated with a set of outputs. Consider using these connectors for an audio or video recorder.
•You may optionally connect a source to both an analog and digital audio input. This is useful for making recordings, for multizone applications or simply as a backup.
Analog 2 and 4 Outputs: Connect either of these analog audio outputs to the analog audio inputs of a recording device.
A signal is available at these outputs whenever an analog audio source is playing.
Zone 2 Audio Outputs: Connect these jacks to an external amplifier to power the speakers in the remote zone of a multizone system.
Subwoofer Output: If you have a powered subwoofer with a
The Bridge III Input: Connect the included Harman Kardon docking station to this input for use with most docking
iPod models, 4G and later, iPhone or iPhone 3G (not included). Turn the receiver off (Standby mode) when connecting The Bridge III.
Fan Vents: This area contains vents used by the AVR 3600’s fan to cool the system. Maintain a clearance of at least 3 inches from the nearest surface to avoid overheating the unit. It is normal for the fan to remain off at most normal volume levels. An automatic temperature sensor turns the fan on only when it is needed.
IMPORTANT NOTE: Never block the fan vents, as doing so could allow the AVR to overheat to dangerous levels.
Video 1/2/3 Inputs: Use these jacks to connect your video- capable source components (e.g., VCR, DVD player, cable
TV box) to the receiver. Use only one type of video connection for each source.
Video 2 Output: Connect this analog video output to the composite video input of a recording device. A signal is available at this output whenever an analog video source is playing.
Video Monitor Output: If any of your sources use composite video connections, connect this monitor output to the corresponding input on your video display. If your video display is equipped with HDMI or component video inputs, this connection is unnecessary, as the AVR 3600 will convert the composite video source signal to the correct format for a single
Component Video 1/2 Inputs: If a video source has analog component video (Y/Pb/Pr) capability, and if you are not using an HDMI connection, connect the component video outputs of the source to one of the sets of component video inputs. Do not make any other video connections to that source.
10