CONNECTIONS
audio jack. Do not plug a composite video cable into an analog or coaxial digital audio jack, or vice versa. Both the chrominance (color) and luminance (intensity) components of the video signal are transmitted using a single cable. See Figure 10.
Composite video cable
Figure 10 – Composite Video
Component video separates the video signal into three compo- nents – one luminance (“Y”) and two
Y Green
Component | Pb Blue |
video cable |
Pr Red
Figure 11 – Component Video
If it’s available on your video display, an HDMI connection is recom- mended as the best quality connection, followed by component video, and then composite video.
NOTES:
•
•Standard and
ANTENNAS
The AVR 3600 uses separate terminals for the included FM and AM antennas.
The FM antenna uses a
compatible with the
USB PORT
The USB Port on the AVR 3600 is used only for software upgrades. If an upgrade for the receiver’s operating system is released in the future, it may be downloaded to the AVR using this port. Complete instructions will be provided at that time.
Figure 12 – FM Antenna
The AM loop antenna needs to be assembled. Connect the two leads to the spring terminals on the receiver. The AM antenna leads have no polarity, and you may connect them to either terminal. See Figure 13.
Figure 13 – AM Antenna
To enjoy SIRIUS satellite radio, purchase a SIRIUS Ready tuner module and a subscription to the SIRIUS service. Visit www.sirius.com
for information on
20