ADVANCED FUNCTIONS
The first number indicates the number of front channels in the signal:
“1” represents a monophonic recording, usually an older program that has been digitally remastered or, more rarely, a modern program for which the director has chosen a special effect.
“2” indicates the presence of the left and right channels, but no center channel.
“3” indicates that all three front channels (left, right and center) are present.
You may select a different mode. The choice of surround modes depends on the number of speakers in your system.
•• Virtual Surround: Harman Virtual Speaker
•• Stereo:
•• Movie: Logic 7 Movie, DTS Neo: 6 Cinema, Dolby Pro Logic II Movie, Dolby Pro Logic IIx Movie
•• Music: Logic 7 Music, DTS Neo: 6 Music, Dolby Pro Logic II Music, Dolby Pro Logic IIx Music
The second number indicates whether any surround channels are present: “0” indicates that no surround information is present.
“1” indicates that a matrixed surround signal is present. “2” indicates discrete left and right surround channels.
“3” is used with
“4” is used with
The third number is used for the LFE channel: “0” indicates no LFE channel.
“.1” indicates that an LFE channel is present.
The
Dolby Digital 2.0 signals may include a Dolby Surround flag indicating
When a PCM signal is received, the PCM message and the sampling rate (32kHz, 44.1kHz, 48kHz or 96kHz) will appear.
When only two channels – left and right – are present, the analog surround modes may be used to decode the signal into the remaining channels. If you would prefer a different surround format than the native signal’s digital encoding, press the Surround Modes Button to display the Surround Modes menu (see Figure 30).
The Auto Select option uses the native signal’s digital encoding, e.g., Dolby Digital, DTS, Dolby TrueHD or
Each category is set to a default surround mode:
•• Virtual Surround: Harman Virtual Speaker
•• Stereo:
•• Movie: Logic 7 Movie
•• Music: Logic 7 Music
•• Video Game: Logic 7 Game
•• Video Game: Logic 7 Game, Dolby Pro Logic II Game, Dolby Pro Logic IIx Game
Once you have programmed the surround mode for each type of audio, select the line from the Surround Modes menu to override the AVR’s automatic surround mode selection. The AVR will use the same surround mode the next time the source is selected.
Please refer to Table A12 in the appendix for more information on which surround modes are available with different bitstreams.
Dolby Surround Settings
Some additional settings are available for Dolby modes. When the Dolby Pro Logic II or IIx Music modes have been selected, choose the Edit submenu to adjust the Center Width, Dimension and Panorama settings. See Figure 29.
Figure 29 – Dolby Pro Logic II/IIx Music Mode Settings
Center Width: This setting affects how vocals sound through the three front speakers. A higher number (up to 7) focuses the vocal information tightly on the center channel. Lower numbers broaden the vocal soundstage. Use the M N Buttons to adjust.
Dimension: This setting affects the depth of the surround presentation, allowing you to “move” the sound toward the front or rear of the room. The setting of “0” is a neutral default. Setting
Panorama: With the Panorama mode turned ON, some of the sound from the front speakers is moved to the surround speakers, creating an enveloping “wraparound” effect. Each press of the OK Button toggles the setting on or off.
ENGLISH
5
