Technicolor - Thomson 23LB020S4, 30LB020S4 Adjusting tone settings, Channel-specific settings

Operation

Adjusting tone settings

1.Open the Sound menu: Press MENU button.

2.Select Sound in the Main menu using arrow buttons Ÿ/

⁄.

3.Press arrow button ÿto move the green marker to the Sound menu.

4.If a stereo signal is received, the option of changing be- tween stereo and mono reception is available in the Nor- mal sound menu item.

5.Use the arrow keys Ÿ/ ⁄ to select the menu items

Treble, Bass or Balance.

6.Mode (Wide/Normal) creates the effect of acoustic base dispersion. This gives the impression that the loud speakers have been moved further apart from each other.

7.AVL(On/Off):AVl (Automatic Volume Levelling) cor- rects the differences in volume levels between individual television programs and advertisements. If you prefer the fluctuations in volume to remain, for example with music Programs, set theAVLto Off.

8.Use arrow buttons !/ ÿto modify the relevant data.

9.Press the OK button to store the settings.

10.Press the EXIT button to quit the menu.

Note:

The Sound menu can also be opened by pressing green button.The green marker is already in the Sound menu. Press OK button to save any changes. The menu auto- matically disappears approx. 5 seconds after the last in- put was made.

Channel-specific settings

When switching channels there are sometimes differences in volume and contrast. The volume and the contrast can therefore be adjusted individually for each channel position.

1.Select the Pr. set menu: Press MENU button.

2.Select Pr. set in the Main menu using arrow buttons Ÿ / ⁄.

3.Press arrow button ÿto move the green marker to the Pr. set menu.

4.Use arrow buttons Ÿ/ ⁄ to select the individual menu items.

5.Use arrow buttons !/ ÿto modify the relevant settings or data.

6.Select the channel position from the Programme line - the relevant channel name should appear automatically.Atotal of four favourite teletext pages per channel position can be specified in the lines TXT-page 1 – 4 by entering the three-digit number of a teletext page. These can then be ac- cessed directly by pressing the F1-F2-F3−F4function buttons (see section The function buttons ... on page 19).

7.In the Volume and Contrast lines, adjust the values correspondingly using the arrow buttons !/ ÿ.

8.Press the OK button to store the settings.

9.Press the EXIT button to quit the menu.

16