Technicolor - Thomson 30LB020S4, 23LB020S4 Auxiliary equipment, Connecting auxiliary equipment

		Auxiliary equipment
Auxiliary equipment		Connecting a satellite receiver or a Set-Top Box in com-
Connecting auxiliary equipment		bination with a video recorder:
		Connect the connecting cable for the satellite or antenna/ cable
	Note:	system (Å, Ç) with the corresponding input of the satellite re-
	All units should be switched off before auxiliary
		ceiver or Set-Top Box. Loop the terrestrial signal (antenna/cable),
	equipment is connected. Only use the correct cables.
		if possible, as shown in the drawing É.
	Only switch the unit on once all connections are cor-
	rectly made.
	Note:
	Only use high-quality Scart connection cables for
	maximum picture quality.

Connecting a video recorder:

En

The video recorder must be connected via the antenna (HF) Å if timer recordings are made using the video recorder or when an- other Program is to be watched during a recording. Connect the antenna/cable system plug with the antenna input on the video recorder, and the antenna output on the video recorder with the antenna socket for the TV set. In the Program menu, assign a free channel position to the output channel of the video recorder.

The Scart connection Ñ provides optimised picture and sound quality for recordings from the satellite receiver. The connection Ö is recommended for optimised playback. The necessary fully configured Scart cable is available at your specialised dealers.

The television is fitted with up to three Scart sockets (see Specifi- cations on page 3). An additional Scart connection Ç provides optimum picture and sound quality. The required cable is avail- able at your specialist dealer.

Connecting to external AV sources

AV signal

Connect a video recorder, for example, to Scart socket E (Scart 1). AV signals (picture and sound) can be recorded and repro- duced via this socket.

Scart socket D (23LB020S4, 30LB020S4) or F (15LB020S4, 20LB020S4) are only used to reproduce the AV signal.

25