Operation
Childproof lock
1.Open the Lock menu: Press MENU button.
2.Select Lock in the Main menu using arrow buttons Ÿ/ ⁄.
3.Press arrow button ÿto move the green marker to the Lock menu.
4.Use arrow buttons Ÿ/ ⁄ to select the individual menu items.
5.Use arrow buttons !/ ÿto modify the relevant settings or data.
Entering or changing the security code:
1. Select Change code and enter a
2.Press the OK button to store the settings.
As a precaution, you should note down your selected security code.
Security code: __ __ __ __
The safety code 0000 is preprogrammed ex works.
Activating the childproof lock:
1.First check whether Off appears in the Parental control line in the Lock menu. Quit the menu by pressing the EXIT button.
2.Press the MENU button three times to display the station list for blocking individual channels for child protection.
3.To block an individual channel, select it and confirm each selection by pressing the red button (On). The blocked channels are indicated by the $ icon.
4.Conversely, the individual channels can be unblocked by pressing the green button (Off). The $ icon disappears.
5.Quit the menu by pressing the EXIT button.
6.Then open the Childproof lock menu. Select the Paren-
tal control line and set it to On.
7.Press the OK button to store the setting.
8.Quit the menu by pressing the EXIT button.
The childproof lock is only active for the channels marked with a dollar sign $.
A message requesting code input appears on the screen if the Childproof lock menu is then selected. The Childproof lock menu appears only after the correct Code has been input using the numeric buttons (0−9).
Note:
The screen is blank if a blocked channel position is se- lected.The Programme under Parental
control window appears.
The security code only has to be entered once. It can, however, be modified at any time when the childproof lock is not activated.
If the childproof lock is activated, access to the Install. menu, the Pr. set menu, the Pref. menu and the Reset menu is blocked.
The Scart sockets on the rear of the unit are also blocked if the childproof lock is activated.
If you forgot the security code, please consult the tech-
nical customer services department or ask your dealer.
PIC (Picture in computer)
While viewing a PC picture, you can insert a video picture.
The inserted picture can be from the antenna or from a Scart socket.
-Press yellow key on the remote control to display the PIP picture on
-Pressing again yellow key increases the size of the PIP picture.
-Pressing a third time yellow key erases the PIP picture.
-While PIP picture is displayed, you can scroll through TV channels with blue key or through AV programmes with green key.
-You can also change the PIP position with red key.
Note : the PC resolution should be set to mode of 640x480 to ensure PIPworks properly (see page 21).
20
