Operation
Operation
Switching on/off
Actuate power switch (3) to activate standby mode. The standby indicator lights up (1) red. To switch on the device, press the 
button on the remote control. The standby indicator 1 goes out.
Press the 
button on the remote control to turn the active unit to standby mode. The standby indicator lights up (1) red.
Caution!
Use an appropriate power supply and avoid using mul-
tiple socket outlets!
To avoid damage caused by thunderstorms, pull out the
mains and antenna sockets during the storm.
Do not touch power supply plugs with wet hands - risk
of electric shocks!
Channel selection
•The channels are selected directly by pressing the numeric keys (0−9). To select channels with
•Pressing arrow buttons Ÿ/ ⁄ selects the channels one by one.
•The channels can also be selected in the channel list. Press the MENU button twice, the channel list appears on the screen.
Achannel can be selected by pressing arrow buttons! |
|
Ÿ/ ⁄. |
|
To confirm the channel selected, press OK button. | En |
Sleep mode |
|
Setting channels
Unit configuration
1.Open the Pref. menu: Press MENU button.
2.Select Pref. in the Main menu using arrow buttons Ÿ/
⁄.
3.Press the arrow key ÿto move the green marker to the Pref. menu.
4.Use arrow buttons Ÿ/ ⁄ to select the individual menu items.
5.Use arrow buttons !/ ÿto modify the relevant settings or data.
If Program is no longer received on a certain channel, e.g. after the station signs off or if there is no antenna signal, the unit auto- matically switches to standby mode after approx. 7 minutes.
Note:
InAV mode (operation of an external device using one of the Scart connection sockets on the rear of the unit), sleep mode is disabled.
6.When channels are stored automatically, they are sorted ac- cording to the usual order they are stored in the respective countries. Select the corresponding country in the Coun- try line. Select the menu dialogue language in the Lan- guage menu item.
Various functions can be assigned to buttons
The number given in the Nb of Pr.line limits the amount of channels when "zapping". Higher channel numbers will there- fore be ignored when channels are selected one by one (zapping). These channels can only be selected using the numeric keys (0−9) on the remote control and in the channel list.
7.Press the OK button to store the settings.
8.Press the EXIT button to quit the menu.
13
