Technicolor - Thomson 20LB020S4, 23LB020S4, 30LB020S4, 15LB020S4 Storing channels automatically

Operation

Storing channels automatically

1.Open the Install. menu: Press MENU button.

2.Select Install. in the Main menu using arrow buttons

Ÿ/ ⁄.

3.Press arrow button !/ ÿto move the green marker to the Install. menu.

4.Select Search using arrow buttons Ÿ/ ⁄.

5.Press arrow buttons !/ ÿto start the search.All stations received are automatically stored in the channel positions in ascending numerical order.

6.Press EXIT button to stop the search early.

7.If the video recorder channel position is also to be pro- grammed automatically, then connect the video recorder correctly with the antenna (HF) and play a pre-recorded cassette. Refer to the instruction manual for the video re- corder to carry out this procedure.

8. Press OK button to save; Save : OK appears in red briefly.

9.Press the EXIT button to quit the menu.

The station identification abbreviations (Name) can still be modi- fied later.

If the picture is just black/white or there is no sound or interfer- ence is evident on some channels, the standard Standard and the Norm be adjusted accordingly in the Install. menu.

Direct channel input / fine tuning

1.Open the Install. menu: Press MENU button.

2.Select Install. in the Main menu using arrow buttons

Ÿ/ ⁄.

3.Press arrow button !/ ÿto move the green marker to the Install. menu.

4.Use arrow buttons Ÿ/ ⁄ to select the individual menu items.

5.Use arrow buttons !/ ÿto modify the relevant settings or data.

6.Set the channel position to where the TV station is to be stored under Program.me

7.Direct channel input is carried out in the

Channel line.

8.Use the button F1 to select between S for special channels and ... for other channels.

9.The channel number (2-digit) can be entered easily using the numeric buttons (0−9);

10.or the channel number can be scrolled through backwards of forwards one by one using the arrow buttons !/ ÿ;

11.For station fine-tuning, select the Frequency line using the arrow keys Ÿ/ ⁄.

12.You can change the settings in 50 kHz intervals up or down by pressing arrow buttons !/ ÿ.

13. The Standard and Norm lines should be adapted to the country-specific TV standard.

14.Any channel name (max. 8 digits) can be specified in Name. The channel name appears automatically for chan- nels with VPS/PDC.

15.Use arrow buttons !/ ÿto select the position where the subsequent character (letter, digit, etc.) should be entered.

16.Select the desired symbol using arrow buttons Ÿ/ ⁄.

17.Use arrow buttons !/ ÿto select a new position, etc.

14