Operation
Dolby Virtual Surround Sound and Panorama
Open the
Select Dolby Virtual for decoder mode by pressing the relevant arrow buttons !/ ÿ.
or select the decoder mode Panorama.
Use arrow buttons Ÿ / ⁄ to select the individual menu items. Use arrow buttons !/ ÿto modify the relevant settings or data.
Adjust the intensity of the surround signal under Level.
The volume of the right and left speaker can be changed under Balance to achieve optimised stereo playback.
Mode (Wide/Normal) creates the effect of acoustic base dispersion. This gives the impression that the speakers have been moved further apart.
Press the OK button to store the settings. Press the EXIT button to quit the menu.
Note:
In order to achieve an improvement in the
Panorama – must be selected.
When playing back Dolby Pro Logic Surround sound,
the decoder mode – Dolby Virtual– produces a 3- D sound similar to that of a home theatre system.
Volume level adjustment for Dolby Virtual Surround Sound and Panorama:
In order to give the sound the desired
To adjust the level, select the decoder mode Test.
When the arrow buttons Ÿ/ ⁄are pressed, the test signal
generator sends the noise signal (tech.: "pink noise") alternately (for approx.
Adjust the intensity of the surround signal under Level. Under Balance, arrow buttons ! / ÿ can be used to adjust the vol- ume of the relevant loudspeaker. The noise signal must sound equally loud on both channels from the listener's position.
Note:
Once saved, the basic setting only needs to be adjusted when the position of the listener or the TV setup changes.
Press the OK button to store the settings. Now select the desired decoder mode.
18
