3. Web Control
3.1 Projector Web Control - Date/Time Settings (continued)
| Item | Description | |
|
|
| |
Time difference | Configures the time difference. Set the same time difference | ||
as the one set on your computer. If unsure, consult your IT | |||
|
| manager. | |
SNTP | Click the [ON] check box to retrieve Date and Time | ||
information from the SNTP server and set the following items. | |||
|
| ||
|
| Configures the SNTP server address in IP format. | |
|
| • The address allows not only IP address but also domain | |
| SNTP Server Address | name if the valid DNS server is setup in the Network | |
|
| Settings. The maximum length of host or domain name is up | |
|
| to 255 characters. | |
| Cycle | Configures the interval at which to retrieve Date and Time | |
| information from the SNTP server (hour:minute). | ||
|
| ||
Click the [Apply] button to save the settings.
NOTE • The new configuration settings are activated after restarting the network connection. When the configuration settings are changed, you must restart the network connection. You can restart the network connection by clicking the [Network Restart] on the main menu (
41).
•If you connect the projector to an existing network, consult a network administrator before setting server addresses.
•Once you turn off the projector in the SAVING mode (
SETUP menu in the Operating Guide) or the AC power, the current date and time setting is reset.
•To enable the SNTP function, the time difference must be set.
•The projector will retrieve Date and Time information from the time server and override time settings when SNTP is enabled.
•The internal clock’s time may not remain accurate. Using SNTP is recommended to maintain accurate time.
31
