Crestron electronic CP-X3014WN, CP-X4014WN, CP-X2514WN Tools window, Crestron Control, Projector

3. Web Control

3.2 Crestron e-Control®(continued)

3.2.2 Tools window

2

1 4

3 5

Configures the settings between the projector and Crestron® control system. Click the [Exit] button to return to the Main window.

NOTE • If two-byte characters are used, the input text or numbers cannot be set correctly.

•All items on this window cannot be left blank.

1 Crestron Control

Configures the settings of Crestron® control system devices.

Item

Description

IP Address	Configures the IP address of the control system.
IP ID	Configures the IP ID of the control system.
Port	Specifies the port number used for communication by the
	control system. The default setting is 41794.

To apply the settings, click the [Send] button.

2Projector

Configures the network settings of the projector.

Item		Description
Projector Name	Configures the name of the projector. The length of the
	Projector Name can be up to 64 alphanumeric characters.
Location	Configures the location name of the projector. You can specify
	a Location name up to 32 alphanumeric characters.
Assigned To:	Configures the user name for the projector. You can specify a
	user name up to 32 alphanumeric characters.
The usable symbols are space and the following;		!"#$%&'()*+,-./:;<=>?@[\]^_`{}~

To apply the settings, click the [Send] button.

45