Crestron electronic CP-X3014WN, CP-X4014WN user manual Wired Setup, Other Setup, Crestron e-Control

3. Web Control

3.1 Projector Web Control - Network Settings (continued)

			Item	Description
Wired Setup				Configures the wired LAN settings.
	IP Configuration			Configures network settings.
		DHCP ON		Enables DHCP.
		DHCP OFF		Disables DHCP.
			IP Address	Configures the IP address when DHCP is disabled.
			Subnet Mask	Configures the subnet mask when DHCP is disabled.
			Default	Configures the default gateway when DHCP is disabled.
			Gateway
	DNS Server Address			Configures the DNS server address.
Other Setup				Configures other network settings.
				Set whether to or not to use Crestron e-Control®.
	Crestron e-Control			If you choose Disable, the Logon window of the Projector
				Web Control and not the selection window will be displayed
				at first of the Web Control.

Click the [Apply] button to save the settings.

NOTE • The new configuration settings are activated after restarting the network connection. When the configuration settings are changed, you must restart the network connection. You can restart the network connection by clicking [Network Restart] on the main menu (41).

•If you connect the projector to an existing network, consult a network administrator before setting server addresses.

•The WEP Key, WPA passphrase and SSID settings will not be set if the invalid characters are used.

•The projector does not allow both wireless and wired LAN to be connected to the same network. Do not set the same network address for both wireless and wired LAN.

21