Harman-Kardon CDR 30 6FRONT PANEL CONTROLS, ïCDR Deck Pause Button When the, Front Panel Controls

Front Panel Controls

#Finalize Button: Press this button when a recording is complete to initiate the finalization process. The Play/Select Button ( must be pressed within three seconds to activate finalization. Until this button is pressed and the finalization process is complete, CD-R discs may not be played on conventional CD machines. See page 23 for more information on finaliza- tion.

$Record (CDR) Deck Open/Close: Press this button to open the Record Deck %.

%Record (CDR) Deck: This Disc Deck is used to record or play back CD, MP3, CD-R and CD-RW discs.

^Optical Digital Input: This jack accepts the digital audio input signal from a compatible digital audio product and should be connected directly to the optical digital audio output on a CD or DVD player or an A/V receiver or proces- sor. To select this input, press the Input Select Button õ until OPTICAL DIGITAL appears in the Time/Message Display F. Note that the cover with the “eye” icon must be removed before the input is used. Save the cover and replace it when the jack is not in use to prevent dust from entering the jack and degrading the input’s performance.

&Coaxial Digital Input: This input may be used to connect a portable digital audio player to the CDR 30 for digital recording. To select this input, press the Input Select Button õ until COAXIAL DIGITAL appears in the Time/Message Display F.

*Analog Record Level Control: The control is used to adjust the input level when making recordings from analog sources such as cassettes, or when CDs are recorded in an analog mode. See page 23 for more information on record levels.

(CDR Play/Select Button: This button has two functions. It may be pressed when a stan- dard CD is in the Record Deck to put the machine in play, or it may be used to enter a selection or start certain record functions.

îCDR Deck Stop: Press this button to stop the CD in the Record Deck.

ïCDR Deck Pause Button: When the

Record Deck is in the Play mode, pressing this button will pause the disc. If the disc has previ- ously been paused, pressing this button will restart the playback.

ðDigital Level Controls: These buttons raise or lower the record level when a digital recording is being made. Pressing both buttons briefly and then release them to change from manual to automatic digital recording level control. See page 23 for more information on digital recording levels.

ñMP3 Select Button: When a “Multisession” disc containing both standard CD audio and MP3 tracks is playing, the unit will default to play of the standard CD audio tracks. Press this button to play the MP3 tracks.

òCDR Deck Program Button: Press this button to begin the programming sequence for a disc in the CDR deck. See page 19 for more information on programmed playback.

óCDR Deck Next Track: When a disc is

playing in the Record Deck %, press and hold this button to play the disc in a fast-forward mode to quickly locate a desired passage. At any time, tapping the button and quickly releasing it will move to the next track on a disc in play.

ôCDR Deck Previous Track: This button has two functions. When a disc is playing in the Record Deck %, press and hold this button to play the disc in a fast reverse mode to quickly locate a desired passage. At any time, tapping the button and quickly releasing it will move to the beginning of the current track, and the next press will move to the previous track. When a disc is stopped, each press will move back one for programming or play when the disc is stopped. Once a track is entered, it may be played by simply pressing the Play Button (j.

õInput Select: Press this button to select the input source (coaxial rear, optical rear, coaxial front, optical front and analog) for recording. See page 23 for more information on input selection.

öCDR Deck Display Select: Press this button to cycle through the time display options for the Record Deck. See page 18 for more information on the time display.

÷Information Display: The indicators in the Information Display provide status reports on the operation of the CDR 30. See page 7 for complete explanations of each indicator.

øRemote Sensor: The IR sensor that receives the commands from the remote control is behind this area. Do not cover or obscure this part of the front panel to avoid any malfunction with the remote.

ùCDP Deck Display Select: Press this but- ton to cycle through the time display options for the Play Deck. See page 18 for more infor- mation on the time display.

üDual/Single Play Select: Press this but- ton to enable both CD decks to play at the same time and function as separate, independ- ent CD units or to have the unit play through all the tracks on the disc in one deck and then switch to the other. In the Dual mode it is also possible to record from an external source in the CDR while the CDP Deck is functioning as a standard CD player. See page 18 for more infor- mation on dual-play capability.

ýCDP Deck Next Track: When a disc is playing in the Play Deck 3, press and hold this button to play the disc in a fast-forward mode to quickly locate a desired passage.

At any time, tapping the button and quickly releasing it will move to the next track on a disc in play.

CDP Deck Previous Track: This button has two functions. When a disc is playing in the Play Deck 3, press and hold this button to play the disc in a fast-reverse mode to quickly locate a desired passage. At any time, tapping the button and quickly releasing it will move to the beginning of the current track, and the next press will move to the previous track. When a disc is stopped, each press will move back one track for programming or play when the disc is stopped. Once a track is entered, it may be played by simply pressing the Play Button

j.

CDP Deck Program Button: Press this button to begin the programming sequence for a disc in the CDR deck. See page 19 for more information on programmed playback.

CDP Deck Pause: When the CDP Deck is running, pressing this button will pause the disc. If the disc has previously been paused, pressing this button will restart the playback.

CDP Deck Play Button: Press this button to begin playback of a CD in the CDP Deck.

CDP Deck Stop Button: Press this button to stop the CD in the CDP Deck.

6FRONT PANEL CONTROLS