Remote Control Functions
0
1 |
|
2 | 9 |
3 |
|
4 | 8 |
5 |
|
6 | 7 |
0Standby/Power On | 5Scroll Button |
1Numeric Keys | 6Function/FM Mode Selector |
2Clear Button | 7Band Selector |
3Info/RDS Button | 8Select Button |
4Auto Tuning Button | 9Memory Button |
0Standby/Power On: Press this button to turn on the TU 970; press it again to turn the unit off (to Standby). Note that the Power Indi- cator 1 next to the switch will turn blue when the unit is on.
1Numeric Keys: These buttons serve as a
2Clear Button: Press this button to clear presets from your station list.
3Info/RDS Button: Pressing this button will change the content of the lower display line of the Information Display.
4Auto Tune Button: In DAB mode, press this button to automatically scan all available local stations. To scan for all available stations, keep the button pressed for three seconds, until
AUTOSCAN FULL is shown in the Infor- mation Display 7.
5Scroll Buttons: Press L to tune lower frequency stations and K to tune higher fre- quency stations. When a station with a strong signal is tuned, the Information Display 7 will read TUNED. Press again briefly to tune to the next frequency increment in Manual Tune Mode, or keep pressed for automatic search for the next station with a signal strong enough for acceptable reception in Auto Tune Mode. These buttons also control the parameters in the different menus, like the Control Ring ) on the front panel.
6Function/FM Mode Selector: In DAB mode, pressing this button will activate station order, signal error rate, preset tune, software ver- sion, Dynamic Rate Control or manual tune fea- tures. In FM mode, press this button to select the stereo or mono mode for FM tuning. In the stereo mode, the word STEREO will be shown in the Information Display 7, and stereo reception will be provided when stations are transmitting stereo signals. In the mono mode, the left and right signals from stereo broadcasts will be mixed together and reproduced through all channels. Select MONO for better reception of weak signals.
7Band Selector: Press this button to change between the DAB, FM and AM frequency bands.
8Select: In FM or AM mode, press this but- ton to select Auto Tune, Manual Tune or Preset Tune.
9Memory Button: Press this button to open the memory position that stores a preset location in the tuner. 10 DAB presets can be stored, as well as 30 FM and 30 AM presets. (See page 9 for more information on tuner pre- sets.)
6REMOTE CONTROL FUNCTIONS
