OPERATION
AL550
LOADING THE POWER CHAIRUP
DOWN
ON
1
Insert and turn key. Press down on switch to lower platform.
3
Slowly drive chair unto platform as shown.
SLOW
THREE WAYS TO VERIFY YOUR CHAIR
IS SUCCESSFULLY LOCKED DOWN
1)AUDIBLE "CLICK or POP" SOUND
As the chair enters the locking device,
it should be driven forward until an audible pop or clicking sound is heard. This sound
is the locking device setting itself around
the chair's docking device pin.
2
Continue to lower as platform automatically unfolds. Stop when platform reaches ground.
4
TEST LOCKING DEVICE
5
AFTER ALL THREE TESTS ARE PERFORMED Raise platform until motor's clicking noise is heard
2) VISUAL INDICATOR
NOT
LOCKED
The yellow indicator will extend and stay extended when the chair is successfully locked in place.
3) REVERSE TEST | LOCKED |
|
Attempt to back the chair off the platform. The chair will NOT move in any direction when successfully locked.
17
Your chair is now ready for transport. Remove key if desired.