VEHICLE HITCH
Hitch Adapters
Standard Class 3
AL125Class 3 Extra long
A Hitch Adapter is the part of the lift that plugs into a vehicle's trailer hitch. Several hitch adapters are available to fit the needs of differnet vehicles.
When selcting a Hitch Adapter you should determine the hitch class and measure the bumper distance.
Bumper distance is the length from the trailer hitch's bolt hole to the rear most point on the vehicle.
Standard Class 2
AL127Class 2 Extra long
Class 3 Short
AL12322in Drop Class 3
AL12366in Drop Class 3
Hitch class is usually printed on the trailer hitch, however it can also be determined by measuring the inside of the receiver on the trailer hitch. Class 2 hitches measure
Class 3 hitches measure 2" x 2"
Once you have determined the hitch class and bumper distance, refer to the diagram below to select the proper hitch adapter.
As always, Harmar Mobility's trained personnel
will be glad to assist you in selecting the
proper hitch adapter.
Hitch Class | Bumper Distance | Bumper Distance | Bumper Distance |
Class II | |||
| AL126 | AL127 |
|
Class III | AL123 | AL125 | AL125 |
Shorter adapters available for
shallow hitches.
Drop adapters available for higher
than normal vehicles.
5
Class 2 Short
AL12355in Drop Class 3
AL12654in Drop Class 2