OPERATION

AL550

UNLOADING THE POWER CHAIR

UP

DOWN

ON

2

TO RELEASE CHAIR

Slide knob this direction

1

Insert and turn key. Press down on switch to lower platform.

To avoid bending over, you may wish to release chair from Locking Device prior to lowering platform. Be sure the drive wheels are engaged, and the chair's power is OFF.

Slowly back chair off platform

3

Raise the platform by pressing up on the switch until motor's clicking noise is heard. Platform will fold automatically. Remove the key if desired.

NOTE: During transport, vibration may cause the chair to tighten itself in the locking device, making the release knob difficult to slide. To overcome this, simply drive the chair forward a bit. This will take pressure off the knob, allowing an easier release.

Once the chair has left the locking device, it automatically resets itself to accept the next time the chair needs to be transported. No adjustment of the release knob is required.

19