Hasbro Designers World TV Game manual Connecting to a VCR or DVD player

2.Insert the Game Console’s yellow plug into the yellow video-in jack on the TV.

Note: These jacks are normally found on the front of the TV near the adjustment controls, or on the back of the TV near

the antenna and cable connections.

3.Turn on your TV and set it to the channel/video input mode directed by

your TV owner’s manual.���������

Connecting to a VCR or DVD player:

1. Make sure the VCR or DVD player is

properly connected to the TV.	�����������������
2. Insert the Game Console’s white plug	�����������
	�����������
into the white audio-in jack on the VCR
	����������
or DVD player.
	��������

3.Insert the Game Console’s yellow plug into the yellow video-in jack on the VCR

or DVD player.	VCR
4. Turn on your TV and VCR or DVD player.		VIDEO PLUG
5. Set your TV, VCR or DVD player to the		(YELLOW)
channel / video input mode directed by
your TV, VCR or DVD player owner’s manual.	AUDIO INPUT
6. Slide the ON/OFF switch on the [game
	VIDEO INPUT	AUDIO PLUG
console control pad] to ON.
		(WHITE)

See Troubleshooting on page 17, if necessary.

7