Hasselblad H1D user manual Attaching/removing the battery, Attaching the battery

A

B C D E F

Hasselblad H1D 57

C.External Power Supply Socket: plug the cable from an external power supply into this socket. See ‘Technical Specifications’ for power supply requirements.

D.Link connector: is connector accepts the camera link cable, which connects to the ‘link’ connector on the camera.

E.Status indicator: indicates that power is supplied to the unit. e

color indicates the current status of the Image Bank: Red = Error, Yellow = Busy, and Green = Ready. If the indicator flashes, the battery needs recharging.

F.On/Off button: switches the Image Bank and sensor unit on/off.

Attaching/removing the battery

Attaching the battery

To attach the battery on the Image Back follow procedure below:

1.Lower the battery into the battery compartment.

!Do not place it on top of the terminal pins!

2.Push the battery as far as it goes towards and onto the termi- nal pins.