2.2 WAN

Use the WAN Settings screen if you have already configured the Quick Setup Wizard section and you would like to change your Internet connection type. The WAN Settings screen allows to specify the type of WAN port connect you want to establish with your ISP. The WAN settings offer the following selections for the router’s WAN port, Dynamic IP, Static IP Address, PPPoE, PPTP, L2TP, DNS and DDNS.

Parameters

Description

2.2.1 Dynamic IP address

Your ISP will automatically give you an IP address

2.2.2 Static IP address

Your ISP has given you an IP address already

2.2.3 PPPoE

Your ISP requires PPPoE connection.

2.2.4 PPTP

Your ISP requires you to use a Point-to-Point Tunneling

 

Protocol (PPTP) connection.

2.2.5 L2TP

Your ISP requires L2TP connection.

2.2.6 Telstra Big Pond

Your ISP requires Telstra Big Pond connection.

2.2.7 DNS

You can specify a DNS server that you wish to use

2.2.8 DDNS

You can specify a DDNS server that you wish to use and

 

configure the user name and password provided by you

 

DDNS service provider.

Once you have made a selection, click <More Configuration> at the bottom of the screen and proceed to the manual’s relevant sub-section

36

Page 36
Image 36
Hawking Technology 108G manual Dynamic IP address, Your ISP has given you an IP address already