2.6.6 Static Routing

This router provides a Static Routing function when NAT is disabled. With Static Routing, the router can forward packets according to your routing rules. The IP sharing function will not work any more in Static Routing mode.

Note: The DMZ function of firewall will not work if static routing is enabled.

Parameter

Description

Enable Static Routing

Static Routing function is default disabled. You

 

have to enable the Static Routing function before

 

your routing rules take effect.

Destination LAN IP

The network address of destination LAN.

Subnet Mask

The subnet mask of destination LAN.

Default Gateway

The next stop gateway of the path toward the

 

destination LAN. This is the IP of the neighbor

 

router that this router should communicate with on

 

the path to the destination LAN.

Hop Count

The number of hops (routers) to pass through to

 

reach the destination LAN.

 

 

 

 

 

71

Page 71
Image 71
Hawking Technology 108G manual Static Routing