2.3 LAN
The LAN Port screen below allows you to specify a private IP address for your router’s LAN ports as well as a subnet mask for your LAN segment.
Parameters | Default | Description |
LAN IP |
|
|
IP address | 192.168.1.254 | This is the router’s LAN port IP address (Your |
|
| LAN clients default gateway IP address) |
IP Subnet Mask | 255.255.255.0 | Specify a Subnet Mask for your LAN segment |
802.1d Spanning Tree Disabled | If 802.1d Spanning Tree function is enabled, this | |
|
| router will use the spanning tree protocol to |
|
| prevent from network loop happened in the LAN |
|
| ports. |
DHCP Server | Enabled | You can enable or disable the DHCP server. By |
|
| enabling the DHCP server the router will |
automatically give your LAN clients an IP address. If the DHCP is not enabled then you’ll have to manually set your LAN client’s IP addresses; make sure the LAN Client is in the same subnet as this
40
