in the table and then click "Delete Selected". If

 

you want remove all QoS rules from the table,

 

just click "Delete All" button. Click "Reset" will

 

clear your current selections.

Edit a QoS rule

Select the rule you want to edit and click “Edit”,

 

then you will enter the detail form of the QoS

 

rule. Click “Apply” after editing the form and the

 

rule will be saved.

Adjust QoS rule priority

You can select the rule and click “Move Up” to

 

make its priority higher. You also can select the

 

rule and click “Move Down” to make its priority

 

lower.

 

 

Edit QoS Rule:

You can assign packet classification criteria by its local IP range, remote IP range, traffic type, protocol, local port range and remote port range parameters. The parameters that you leave as blank will be ignored. The priority of this rule will be applied to packets that match classification criteria of this rule. You can limit bandwidth consumed by packets that match this rule or guarantee bandwidth required by packets that match this rule.

Parameters

Description

Rule Name

The name of this rule.

Bandwidth

You can assign the download or upload

 

bandwidth by the unit of Kbps (1024 bit per

 

 

 

58

Page 58
Image 58
Hawking Technology 108G manual Edit QoS Rule, Parameters Description Rule Name, Bandwidth