2.4.7 Static Routing
This router provides a Static Routing function when NAT is disabled. With Static Routing, the router can forward packets according to your routing rules.
Note: The DMZ function of the firewall will not work if static routing is enabled.
|
| Figure 2.21 |
|
|
|
|
|
| Parameter | Description |
|
| Enable Static Routing | The Static Routing function is disabled by default. You have to enable the Static |
|
|
| Routing function before your routing rules take effect. |
|
| Destination LAN IP | The network address of the destination LAN. |
|
| Subnet Mask | The subnet mask of the destination LAN. |
|
| Default Gateway | The next stop gateway of the path toward the destination LAN. This is the IP |
|
|
| address of the neighbor router that this router should communicate with on the |
|
|
| path to the destination LAN. |
|
|
|
|
|
55
