DIVA T/A PC Card User’s Guide 20
Installing the DIVA T/A Software
Note: there is no Setup Wizard for DOS or OS/2. If you are using
DOS or OS/2, go to the section ‘Using the VT100 Configuration
Tool” on page 46.
The DIVA T/A Setup Wizard installs all necessary DIVA T/A files on
your system. These include:
the DIVA T/A on-line documentation
the Eicon DIVA Terminal Adapters Program, which includes
the Configuration Wizard (Windows 95 and NT only)
the Windows Configuration Tool (Windows 3.x & WFW 3.11)
the DIVA T/A Uninstall Utility
To install the DIVA T/A Software:
1
Insert the DIVA T/A CD, and enter d :\SETUP.EXE in the Run
field of the Start menu or File menu (where d: is the drive letter
of your CD drive). The CD Setup screen appears, go to step 2
and continue.
Note: If you are using diskettes to install the software on a
3.x/WFW 3.11 system, type a:\Setup.exe (where a: is your
diskette drive). Skip to step 3 and continue.
2
From the CD Setup screen, select “Start Eicon DIVA Terminal
Adapters Installation Now”; this starts the Setup W izard.
Note: The CD Setup screen also gives you the choice to view the
online DIVA T/A User’s Guide, Reference Guide, or Release
Notes, before installing the DIVA T/A softwa re.