DIVA T/A PC Card User’s Guide 59
Secure ID Connectivity
If you want to use Secure ID, you must use the V.120 protocol. To
enable Secure ID connectivity (Windows 95 and Windows NT 4.0
only):
1
From the Dial-Up Networking group, right-click the connection
on which you want to implement Secure ID, and select
Properties.
2
Under the “Using” field, click Configure.
3
Click the Options tab and enable “Bring up terminal window
after dialing.” With “Bring up terminal window after dialing”
enabled, you are prompted for your user name and password
each time you establish a connection.