1.18 | OPERATING THE MOWER | 1.18 |
|
|
|
SAFETY NOTICE
WARNING - PREVENT ACCIDENTAL STARTING : Always stop the engine and disconnect the spark plug lead before cleaning, inspecting or working on the machine.
1. Engine
2. Spark Plug Lead
3. Spark plug
SAFETY NOTICE
1
2
3 STOP
CS034
WARNING - PREVENT ACCIDENTS: Before mowing, |
|
thoroughly inspect the area where the mower is to be |
|
used and remove all objects which when contacted by |
|
the mower cutterbar could become dangerous projec- |
|
tiles. |
|
Inspect the area for hidden obstructions which when |
|
contacted by the cutterbar could risk health and safety. |
|
Remember the location of these obstructions and ensure |
|
that you mow around them. | CS031 |
IMPORTANT - PREVENT ENGINE DAMAGE : DO
NOT use the mower on a slope greater than 20 degrees.
20omax. CS030
HEIGHT OF CUT
To adjust the height of cut: Grip the lever and pull side- ways to disengage it from the locking notch, then push for- wards to lower or pull backwards to raise the height of cut. Finally release the lever at the required position and ensure it locks firmly into one of the seven notch settings.
Always select a height of cut to suit operating conditions. Aim to prevent engine overloading and blockages by avoid- ing low cuts in long grass conditions. Be prepared to make two cuts when the grass is long.
CS211
485101MT210999A
