1.31 | MAINTENANCE | 1.31 |
|
|
|
CUTTERBAR | Continued. |
|
|
How to sharpen and balance the cutterbar: A slightly worn cutterbar may be
WARNING - PREVENT ACCIDENTS : DO NOT use a |
damaged or excessively worn cutterbar.
30
CS040
Sharpen both cutting edges with a flat file to restore the original cutting edge.
CS025
Ensure that the cutterbar is balanced. Use a screw driver with a round shaft to support the cutterbar through its centre hole. Hold the cutterbar horizontal and then release. A bal- anced cutterbar will remain horizontal. If the cutterbar is not balanced the heavy end will rotate downwards. Sharpen the heavy end until the cutterbar is correctly balanced.
CS026
485101MT210999A