1.36 | FAULT FINDING | 1.36 |
|
|
|
FAULT FINDING
Continued.
PROBLEM | POSSIBLE FAULT | REMEDY |
|
|
|
Engine will not start | Engine under load | Raise height of cut |
| Fuel starvation | Fill fuel tank |
| Engine cold | Set throttle to ‘choke’ position |
| Incorrect/contaminated fuel | Drain fuel tank and fill with |
|
| correct fuel |
| Spark plug lead disconnected | Connect spark plug lead |
| Throttle setting incorrect | Set throttle to ‘fast’ position |
| Engine brake not released | Operate engine brake lever |
| Faulty spark plug | Clean and adjust gap or replace |
|
|
|
Engine runs rough | Spark plug lead becoming | Connect spark plug lead |
| disconnected in use |
|
| Faulty spark plug | Clean and adjust gap or replace |
| Air cleaner blocked | Service air cleaner |
| Incorrect/contaminated fuel | Drain fuel tank and fill with |
|
| correct fuel |
|
|
|
Engine vibrates excessively | Mounting bolts loose | Tighten bolts |
| Cutterbar screws loose | Tighten screws |
| Cutterbar out of balance | Balance cutterbar |
| Bent crankshaft | Consult your dealer |
|
|
|
Cutterbar drive will not | Faulty blade brake clutch | Consult your dealer |
engage / disengage |
|
|
|
|
|
485101MT210999A