1.37 | FAULT FINDING | 1.37 |
|
|
|
FAULT FINDING
Continued.
PROBLEM | POSSIBLE FAULT | REMEDY |
|
|
|
Uneven cut | Undulating ground conditions | Change direction of travel |
| Cutterbar worn | Sharpen the cutterbar |
| Cutterbar out of balance | Balance the cutterbar |
| Wheels / roller damaged | Inspect and replace as necessary |
|
|
|
Discharge chute blocks | Grass is wet | Mow dry grass |
| Cut height too low | Increase cut height |
| Grassbag full | Empty grassbag |
| Slow engine speed | Increase engine speed |
| Airflow through the | Clean the grassbag |
| grassbag is restricted |
|
|
|
|
Mower is hard to push | Cut height too low | Increase cut height |
| Wheels / roller damaged | Inspect and lubricate or replace |
|
| as necessary |
|
|
|
Mower will not self propel | Clutch out of adjustment | Adjust clutch cable |
| Drive belt damaged | Replace drive belt |
|
|
|
Poor grass collection | Airflow through the | Clean the grassbag |
| grassbag is restricted |
|
| Discharge chute blocked | Remove blockage |
| Slow engine speed | Increase engine speed |
| Wet grass | Mow dry grass |
| Grassbag full | Empty grassbag |
|
|
|
485101MT210999A
